Why does a washing machine trip the circuit breaker is among the most common problems many people encounter. This issue may have more than one cause and solution. First of all, in such technical matters, it is recommended to seek professional support before the problem grows bigger.
Why does a washing machine trip the circuit breaker can have different causes depending on the machine and brand. When you know these different reasons and solution suggestions, your approach to the problem will be more accurate.
Bu Yazımızda Neler Var:
Why Does a Washing Machine Trip the Circuit Breaker in 5 Steps?
Why does a washing machine trip the circuit breaker can be summarized in 5 steps. If the issue is not caused by these 5 reasons or continues even after they are resolved, you should definitely seek technical support. Otherwise, permanent damage may occur to your machine.
If we summarize the answers to the question why does a washing machine trip the circuit breaker according to brands, the most common issues can be listed as follows.
| Reasons Why Washing Machines Trip Circuit Breakers by Brand | |
| Bosch washing machine trips circuit breaker | There may be problems with internal components |
| Why does a Profilo washing machine trip the circuit breaker | If the motor is strained or there is water leakage, the breaker may trip |
| Siemens washing machine trips circuit breaker | Heater cables may have become loose |
| Arçelik washing machine trips circuit breaker | There may be a problem with the electrical line |
| Samsung washing machine trips circuit breaker | There may be an electrical line issue |
| Beko washing machine trips circuit breaker | There may be a control board problem |
1 – If the Plug or Socket Is Faulty, You May Experience Circuit Breaker Tripping
Unfortunately, circuit breaker tripping may occur in washing machines or other household appliances that remain plugged in for long periods. Cables that stay connected for a long time heat up and eventually cause the breaker to trip. Another issue may be a faulty socket. You should always have sockets checked before installing household appliances.
2 – If the Washing Machine Drum Has Dropped, It May Trip the Circuit Breaker
If your washing machine moves excessively and makes loud noises, especially during spinning, there may be a problem with the drum. A high-speed rotating washing machine drum may cause the heater cables and motor to rub against each other. Due to a faulty drum, water leakage may occur, damaging electrical components and causing the circuit breaker to trip.
3 – Your Washing Machine Motor May Be Faulty
Due to frequent use, the motor is one of the parts that wears out the fastest. If the motor fails, you may frequently encounter short circuit problems.
4 – A Burnt Control Board Can Cause Circuit Breaker Tripping
One of the most common reasons for circuit breaker tripping is a burnt control board. Even if the control board is repaired, another issue may still exist. Generally, the control board does not fail easily unless it is exposed to water. Identifying the real cause will lead you to a definitive solution.
For issues related to the control board or motor, it is best to contact the manufacturer’s authorized service. This ensures the most accurate solution.
5 – Cable Contact Issues or Broken Wires May Cause Circuit Breaker Tripping
Your washing machine may have cable damage or contact problems due to unknown reasons. Especially if you purchased a second-hand washing machine, it should be inspected. Such issues cause electrical interruptions and short circuits, leading to circuit breaker tripping.
What Causes Circuit Breaker Tripping?
Electrical components used in homes or workplaces wear out over time, leading to circuit breaker tripping. In such cases, identifying the root cause is essential. Otherwise, electrical issues can lead to many other problems. Reasons for circuit breaker damage may include:
- Aging circuit breaker connections and cables
- Exposure of the breaker to excessive voltage
- Burnt cables
Why Does the Circuit Breaker Trip When the Washing Machine Starts?
When the washing machine trips the circuit breaker as soon as it starts, this usually indicates an electrical issue occurring at the moment of initial current draw. When the machine starts, the motor, heater, and electronic board demand power simultaneously, and any leakage current or overload may cause the breaker to cut off the circuit. Especially if the electrical installation is weak or socket connections are loose, circuit breaker tripping may occur more frequently and not always at the same point in every wash cycle.
If a Washing Machine Trips the Circuit Breaker, Is the Problem Always the Machine?
If a washing machine trips the circuit breaker, the problem is not always caused directly by the internal components of the device. In some cases, the home’s electrical installation may also be responsible. Insufficient grounding, multiple high-power devices connected to the same line, or worn-out cables can cause the breaker to trip when the machine operates. Therefore, it is more accurate to evaluate not only the machine but also the socket and overall electrical line condition.
Frequently Asked Questions About Why a Washing Machine Trips the Circuit Breaker
Many people are curious about solutions to washing machine electrical problems, especially whether they can be fixed at home. Here are some frequently asked questions:
1 – How Can Circuit Breaker Tripping Be Prevented?
To prevent circuit breaker tripping, it is important to distribute electrical loads evenly. Concentrating the load on a single point may cause the breaker to trip. In addition, cables and sockets should be checked regularly.
2 – How Much Electricity Does a Washing Machine Consume Per Hour?
The most important factor here is annual energy consumption. An A+++ energy class washing machine consumes approximately 800 watts per hour.
3 – How Can You Tell If a Circuit Breaker Has Tripped?
To check if the breaker has tripped, simply look at the panel. If the switch is down or the wire is broken, the breaker has tripped.
4 – When Does a Washing Machine Consume Less Energy?
The most affordable electricity tariff is between 10:00 PM and 6:00 AM. Using appliances like dishwashers and washing machines during these hours can help save electricity.
5 – Why Does a Washing Machine Trip the Circuit Breaker?
A washing machine usually trips the circuit breaker due to leakage current or overload in electrically powered components. A fault in the heater, motor, cable connections, or electronic board may cause the breaker to cut off the circuit for safety. In some cases, the issue may stem from the home’s electrical installation rather than the machine itself.
6 – How Is Circuit Breaker Tripping Fixed?
If the breaker trips, the washing machine should be unplugged and not restarted immediately. Intervening without identifying whether the issue originates from the heater, motor, or wiring is risky. If the breaker trips every time the machine starts, it should not be used until an authorized service inspects it.
7 – What Causes Circuit Breaker Tripping?
The main cause of circuit breaker tripping is imbalance in the electrical circuit. In washing machines, this usually occurs due to damaged insulation, leakage current caused by moisture, or excessive current draw. The breaker shuts down the circuit to protect both the appliance and the electrical system.
8 – How Can You Tell If the Washing Machine Motor Is Burnt?
If the motor is burnt, the washing machine may not start at all or may stop suddenly during operation. Burnt smells, loud noises, or failure to enter the spin cycle may indicate motor failure. In many cases, a burnt motor causes the breaker to trip.
9 – How Can You Tell If the Motor Brushes Are Worn Out?
When motor brushes are worn, the drum may rotate irregularly or not at all. Struggling during spinning, stopping mid-cycle, or low-speed operation may indicate brush wear. As the issue progresses, circuit breaker tripping may also occur.
10 – How Can You Tell If the Motor Is Completely Faulty?
If the motor is completely faulty, the washing machine will not move at all or may start and stop shortly after. Repeated breaker tripping, strong burning smells, and continuous error codes may indicate the motor has reached the end of its lifespan.
11 – How Can You Tell If the Motor Is Burnt?
When the motor is burnt, the washing machine usually fails to start or experiences sudden power cuts during operation. Continuous breaker tripping, unusual noises, and strong burnt smells are strong indicators of motor burnout.
12 – How Much Does Motor Replacement Cost?
The cost of washing machine motor replacement varies depending on the brand and model. Motor replacement is generally more expensive than simple part repairs, and in some cases, purchasing a new machine may be considered. A service inspection is required for an exact price.
13 – How Can You Tell If the Motor Is Faulty?
If the motor is faulty, the washing machine may lose performance during washing or spinning. Struggling operation, irregular rotation, or inability to complete programs may indicate motor failure. If these issues occur along with breaker tripping, the motor is likely the source of the problem.
